Window Repair in Beaverton, OR
Sash Locks Reset to Work by Hand. Bedroom Casements That Hold Open Again. New Insulated Glass for Cloudy Panes. Aluminum Sliders Rolling to the Latch Again.

A lower window that will not lock and a bedroom window that will not stay open usually trace to small parts: a cam that swings past its keeper, a balance that has lost its spring, or a casement crank with worn teeth. Beaverton Code chapter 8.07, the city's residential property maintenance code, speaks to both failures, the lock on lower windows and the hold-open hardware on bedroom escape windows, and it applies whether the owner lives in the house or rents it out. Its window and bedroom sections use wording several other Oregon city codes share, and Beaverton's code official decides how they apply to a particular house.
Before VResh orders a part, Vlad sorts the problem windows by floor and by room, because a lower window and a bedroom window carry different duties under the city's code.
(503) 272-6436 — Call or Text, Available 24/7
We answer calls and texts at any hour. For storm damage, active leaks, or structural emergencies, calling directly is the fastest path to a response.
Common Window Problems We Fix in Beaverton
01. A Cam Lock That Swings Past Its Keeper
A sash lock is a cam on one sash and a keeper on the frame or the other sash. When the sash settles, or the keeper's screws loosen in old holes, the cam swings past and grabs nothing. VResh lines the two back up, fills stripped screw holes, and replaces a worn cam with a thumb-turn lock of the same footprint.
02. Balances That No Longer Carry the Sash
A hung sash that creeps down after someone raises it, or rides up on its own once released, has a balance pulling with the wrong force, too weak in the first case and too strong in the second. VResh pulls the old balance, orders a match for the sash weight and the channel it runs in, and hooks the new one in.
03. Casement Operators With Worn Gear Teeth
A gear-driven operator at the sill pushes a casement out while two hinge arms keep it square. Worn teeth make the crank grind at first and later slip, so the handle turns while the sash stays still. VResh matches the operator's arm length and handing to a replacement and checks that the sash still swings through its full arc.
04. Double-Pane Glass That Will Not Come Clear
The edge seal of an insulated unit keeps dry air between the panes. After the seal fails, humid air seeps in on warm days and condenses inside the unit as the glass cools, leaving a residue that no amount of washing removes. VResh measures the unit's width, height, and thickness, notes any grid inside, and beds a new unit in the same sash.
05. Flattened Wheels Under an Aluminum Slider
Older aluminum sliders ride on small wheels set into the lower edge of the sliding sash. Once those wheels flatten or seize, the sash scrapes along the sill channel and stops before the latch can engage. VResh takes the sash out of its track, fits new wheels and a new latch, clears grit from the channel, and renews the fuzzy pile seal along the edges.
06. Rain at the Joint Between Frame and Wall
Section 8.07.180 asks each window frame, as maintained against the wall around it, to substantially keep wind and rain out. Rain that shows up indoors has usually crossed that joint rather than come through the glass or the sash. VResh recaulks the joint, adds flashing above a bare head trim if the siding permits, and checks the studs below the sill for decay.
Window Repair Symptoms, Causes, and What Beaverton's Rules Mean
Upstairs and down, the same symptom can carry a different duty under chapter 8.07.
Daylight shows along one edge of a closed sash
Flattened weatherstrip, or a sash pulled out of square
Section 8.07.180 wants each sash to sit weathertight within its frame.
A bedroom casement drifts shut in a breeze
A stripped operator or a loose hinge arm
Section 8.07.290 wants the hardware itself to hold a bedroom escape window open.
Paint on the interior stool flakes away and the bare wood beneath looks gray
A sweating window wetting the stool where its finish has already failed
Peeling paint and decayed wood are on the interior-surface list in section 8.07.200.
A second-floor window over a deck roof has no working lock
A latch that broke or was removed years ago
The lock sentence also covers a window someone could reach from outside, at any height.
Interior trim at a lower corner swells after heavy rain
A split bead between trim and siding, or a missing cap flashing over the head trim
The frame sentence in 8.07.180 makes the outside joint part of the repair.
Window Repair in Beaverton: What the Project Involves
Locks on Lower and Deck-Side Windows
Section 8.07.180 opens with the lock rule: "All windows of a dwelling unit that are openable and that are within ten feet of the exterior grade shall be able to be both opened and locked from the inside without the use of a key or any special knowledge or effort." A second sentence applies the same test to an openable window reachable from outside at any height, such as a balcony window.
A cam that no longer catches leaves a lower window that opens but will not lock. A slider screwed shut through its channel, or a sash lock that takes a key, leaves one that will not open from the room without a key or a tool. VResh restores both functions with a lock worked by hand and takes out screws and keyed hardware an earlier owner added. Beaverton's code official decides whether an add-on such as a removable security pin meets the no-key wording.
Bedroom Escape Windows That Open Full Size and Stay Open
Section 8.07.290 gives every bedroom at least one emergency exit, a window or an exterior door. An escape window's sill sits no more than 44 inches above the floor, or above a permanent step no more than 12 inches high and at least 20 inches wide and 12 inches deep. Its clear opening is at least 20 inches wide and 22 inches high, and at least 5 square feet if constructed after July 1, 1974. It opens from inside without a key and is "held open by window hardware."
On a hung sash, that means balances strong enough to keep it up, and on a casement, an operator and hinge arms that keep it where the crank left it. The repair also has to keep the opening full size, and an insert sash, an added stop, or a casement limiter can take it below those measurements.
The Room Side of the Window: Stools, Aprons, and Paint
Section 8.07.200 asks that peeling, chipping, flaking, or abraded paint in a dwelling be repaired, removed, or covered, and it puts decayed wood on the same list. At a window, that means the stool, the apron, and the room face of the sash, the surfaces a sweating pane keeps wet.
VResh scrapes loose paint to a firm edge, lets the wood dry, fills or splices decay, and primes and paints. In a pre-1978 house, the lead test in step 5 comes first.
When Repair Beats Replacement in Beaverton, and When It Does Not
Repair Is Usually the Right Call When
The failure sits in a part VResh can buy separately, such as the weatherstrip, a lock, the wheels, a glass unit, a balance, or an operator, and the wood or vinyl around it still holds a screw.
Replacement Is Usually the Better Value When
A vinyl or aluminum frame has cracked or bowed so no sash can seal in it, decay has spread through a wood sill or the bottom of the jambs, or the maker stopped producing parts for that line. The main window repair page walks through how VResh weighs the two.
Client's Talk
Serving Portland Metro Area
VResh Construction provides window replacement, siding installation, roofing, dry rot repair and full exterior renovation services throughout the Portland metro area and Southwest Washington.
Portland Metro — Oregon
- Portland, OR
- Oak Grove, OR
- Cedar Mill, OR
- King City, OR
- Happy Valley, OR
- Clackamas, OR
- Milwaukie, OR
- Gresham, OR
- Wood Village, OR
- Scappoose, OR
- Sandy, OR
- Newberg, OR
- Estacada, OR
- Lake Oswego, OR
- Beaverton, OR
- Hillsboro, OR
- Tigard, OR
- Sherwood, OR
- West Linn, OR
- Oregon City, OR
Southwest Washington
Extended Service Areas
Window Repair FAQs for Beaverton Homeowners
Our casement handle folds down, but the sash still will not pull tight. What is wrong?
Many casements lock with a handle that drives a bar along the frame, and hooks on that bar catch keepers on the sash. A keeper knocked out of line or a bent bar lets the handle close while one corner hangs loose. VResh realigns the keepers or replaces the bar with one built for that product line.
Can we spray something on a stiff window ourselves?
A dry silicone spray on clean channels is a sensible first step on vinyl and aluminum windows. Oil and grease hold grit, which wears wheels and weatherstrip. A sash that still drags usually has a worn wheel, a weak balance, or a frame out of square.
Our windows carry no brand name. Can VResh still match parts?
Most makers leave a label in the frame channel, a stamp on the lock or balance, or printing on the spacer. If none turns up, VResh matches the old part by size and profile. If no supplier carries a match, Vlad says so at the visit.
The lever on our sash lock flops loosely. Can VResh tighten it?
A lever that flops usually means the small spring or pivot inside the lock body has broken, and the lock needs replacing. VResh replaces the lock body with one that matches the sash's finish.
Is a repaired window covered once VResh finishes?
VResh puts a written workmanship warranty on its repairs. If the window is a Milgard and its maker's warranty is still running, a fogged unit or failed hardware may count as a warranty repair, which VResh can take on as a Milgard warranty service provider.
We bought a vacant house with boards over two windows. What has to happen before we move in?
Section 8.07.115 requires that measures used to secure a vacant dwelling, boarded windows included, come off before anyone lives there. Behind the boards, the glass, sash, and frame usually need repair as well.
Our basement bedroom window sits in a well with rotting timber sides. Does that matter?
For a below-grade escape window, section 8.07.310 calls for a well the full width of the window, built of permanent materials, with 3 feet of clearance out from the wall and a bottom no more than 44 inches below grade.
Our house is a designated Beaverton landmark. Does repairing the windows need historic review?
Section 40.35.10 of the Beaverton Development Code leaves exterior maintenance and repair out of Historic Review when any change to original materials or appearance is consistent with previous approvals, and it exempts changes in paint color as well. Beaverton Planning decides whether a given repair qualifies.
Get a Free Window Repair Estimate
Flag any bedroom window and any window beside a deck or balcony when you ask for the estimate. A photo of a frame label or lock stamp lets VResh look for parts before the visit.
- Same-day response on all estimate requests
- No commission-based sales, just honest quotes
- Licensed OR #241979 · WA #VRESHCL776ND
- EPA Lead-Safe Certified for pre-1978 homes
- Written workmanship warranty on our repairs
