Patio and French Door Installation in Hillsboro, OR
Folding and Multi-Slide Glass Walls for Wide Rear Openings. French Pairs That Repeat the Windows' Grid. High-Performance or Flush Sills Picked by Exposure. New Openings Placed With the City's Review in Mind.

On an older Hillsboro house, the spot chosen for a new patio door can draw the city's attention before the door style does. For an Inventory-listed house, or one in the downtown conservation zone, the review turns on which wall takes the opening and what has to come out of it to make room.
Folding glass walls and multi-slide doors earn their place in wide rear openings, and those systems ask more of a wall than a French pair does. They need a long header, a sill chosen for the weather that reaches it, and, for a pocketing unit, a thicker wall to slide into. VResh frames the opening, sets the sill and panels, and matches the new trim and glass pattern to the rest of the house.
(503) 272-6436 — Call or Text, Available 24/7
We answer calls and texts at any hour. For storm damage, active leaks, or structural emergencies, calling directly is the fastest path to a response.
Why Hillsboro Homeowners Choose VResh for Patio and French Doors
01. Folding Panels With a Door for Everyday Use
A folding glass wall hinges its panels together so they fold and stack against one or both jambs. Many systems can make one panel a hinged traffic door, which opens like an ordinary door for routine trips outside without folding the whole run. VResh sets the panels on their track and adjusts each hinge line so the run folds without binding and closes into a straight, sealed line.
02. Multi-Slide Panels That Stack or Disappear
A multi-slide door runs its panels past each other on parallel tracks. In a stacking layout, the open panels stand together at one side of the opening. In a pocketing layout, they slide into a cavity framed inside the wall beside it, which leaves the opening clear and asks for a stretch of wall long enough to hold every panel.
03. A Sill Matched to the Weather at That Wall
Sills for wide glass systems trade water resistance against a level floor. NanaWall calls its high-performance sill its most weather-resistant option and describes its fully recessed flush sill as designed for interior applications. On a back wall the eaves do not shelter, where rain reaches the door directly, VResh plans for a high-performance sill, and a flush sill suits an opening between the house and an enclosed sunroom.
04. Divided Lites Copied From the House's Windows
On a house with divided-lite windows, a door with plain glass can look borrowed from another building. Simulated divided lites fix bars to the inside and outside faces of the glass with a spacer between the panes, so the pattern reads as separate panes from inside and out. Vlad measures the bar widths and the pane layout on the windows beside the new opening, and the owner picks a door that repeats them.
05. Exterior Casing That Matches the Old Trim
A factory brickmould, the stock outside trim that comes attached to a new door, rarely matches the casing on an older house. VResh builds the new door's exterior casing to the profile and width of the trim around the house's other openings, and seals and paints it once it is up.
06. Wood Inside, Cladding Outside
Clad-wood doors put a weather-resistant skin on the outside face and leave wood on the inside. The inside can take paint or stain to match the room's trim, while the cladding takes the rain. For a period house, that lets the interior keep wood around the glass without exposing bare wood to the weather.
Patio and French Door Options for Hillsboro Homes
Glass walls suit a wide, plain back wall, while a period house usually points toward a French pair.
Folding glass wall
Hinged panels that fold to one or both sides and open nearly the full width. It suits a newer house whose back wall faces a large patio and can take a long header.
Stacking multi-slide door
Panels that ride on parallel tracks and stand together at one jamb when open. It fits a family room wall where a pocket would run into a corner or a window.
Pocketing multi-slide door
Panels that slide out of sight into the wall beside the opening. It fits a rear addition or remodel where the wall can be built thick enough for the pocket.
French pair with simulated divided lites
Two hinged leaves with bars on the glass inside and out. It fits a period house with divided-lite windows on the same wall.
Hinged pair with a transom
A French pair with fixed glass above it. It suits a room with a tall ceiling, where the transom lifts the line of glass closer to the ceiling.
Like-size door in the old rear opening
A new door built to the old frame's size. It fits an Inventory house where the owner wants to keep the wall as it is, though an old door that is original or more than 50 years old is itself a feature the city's major list names.
Patio and French Door Installation in Hillsboro: What the Project Involves
A New Rear Opening on a Hillsboro Inventory House
For an Inventory house, chapter 12.27 of the development code splits alterations into a minor list, handled by a Type II procedure, and a major list, handled by Type III. The minor list includes structural or architectural additions to a designated structure when the addition is "not visible from the public right-of-way and the addition does not necessitate the removal of an original feature".
For a patio door, that turns on two facts about the wall. A door cut into a stretch of plain rear wall that no public street can see, with every original window left in place, reads like the minor description. The major list names the removal of any original architectural feature or any feature more than 50 years old, and that can take in an original back window turned into the door or the siding a cut removes. Hillsboro Planning decides which track an application takes, and the Director can send a minor one to Type III, where the Historic Landmarks Advisory Committee makes recommendations to the Planning Commission. That is why Vlad asks about the back windows before a door style comes up.
Back Walls in Hillsboro's Downtown Conservation Zone
In the SCR-DNC zone, section 12.61.700 treats anything added to, taken from, or changed about a structure's outside appearance as an exterior alteration, and a new door opening does all three. The zone's findings ask that street-facing walls hold on to their entrances, doors, windows, and the other features the section names. A back wall that faces no street sits outside that list.
The rear wall is not free of review. The same section asks for a finding that an exterior alteration will rehabilitate or restore historic features, retain existing form and character, or prevent further deterioration or damage, and that test reaches every wall. Hillsboro Planning weighs those findings. A French pair with divided lites and matched trim changes a back wall's character less than a full glass wall does, and Vlad points that out when the owner weighs the two.
Client's Talk
Serving Portland Metro Area
VResh Construction provides window replacement, siding installation, roofing, dry rot repair and full exterior renovation services throughout the Portland metro area and Southwest Washington.
Portland Metro — Oregon
- Portland, OR
- Oak Grove, OR
- Cedar Mill, OR
- King City, OR
- Happy Valley, OR
- Clackamas, OR
- Milwaukie, OR
- Gresham, OR
- Wood Village, OR
- Scappoose, OR
- Sandy, OR
- Newberg, OR
- Estacada, OR
- Lake Oswego, OR
- Beaverton, OR
- Hillsboro, OR
- Tigard, OR
- Sherwood, OR
- West Linn, OR
- Oregon City, OR
Southwest Washington
Extended Service Areas
Patio and French Door FAQs for Hillsboro Homeowners
When a folding door is open, how far do the panels stick out?
It varies with the system and the panel count. The folded panels park in a stack beside the jamb, standing out from the opening into the room or onto the patio on whichever side the system folds toward. The maker's layout drawing for the chosen panel count shows how deep that stack runs, and furniture and planters need to stay clear of it. Vlad and the owner mark where the stack will stand, so the fold side suits the room.
How thick does the wall have to be for a pocketing door?
Thicker than a typical exterior wall. A pocketing system usually pairs the structural exterior wall with a parallel interior wall, and the panels ride in the space between. Andersen's site-prep guide for its pocketing multi-slide recommends building the interior pocket wall after the door is in.
Will a wide glass wall make the room cold in winter?
The glass and the sill decide most of that. A low-E insulated glass package cuts heat loss through the panels, and NanaWall builds its high-performance and flush sills with a thermal break, which slows heat moving out through the metal at the floor. VResh air-seals around the frame as well, to stop air slipping past the unit.
Our Orenco Townsite house needs a new door in its old back opening. What does the code ask?
Consistency with the house. For a Townsite dwelling from the 1910-to-1938 period, section 12.62.300.M asks that door reconstruction or replacement stay consistent with the house's structural character and style, and it encourages wood. A clad-wood door with divided lites sits closer to that wording than an aluminum unit, and Hillsboro Planning applies the standard to a given house.
Which part of the wall holds up the panels of a folding door?
That depends on the system. NanaWall builds some folding systems to hang their panels from a track in the head and others to roll them on a floor track, so either the header or the structure under the sill carries the weight. VResh frames whichever one bears the load to the maker's guide for the system the owner picks, since a top-hung run depends on a header that stays stiff under that load.
Get a Free Patio and French Door Estimate
If you know whether the back window you hope to open up is original to the house, or roughly when the house was built, include that with your request. Those two facts show Vlad which of the city's review tracks to raise at the visit.
- Same-day response on all estimate requests
- No commission-based sales, just honest quotes
- Licensed OR #241979 · WA #VRESHCL776ND
- EPA Lead-Safe Certified for pre-1978 homes
- Sill pan flashing on every door installation
