Two white double-hung windows in the grey lap siding beside the brick corner of a two-storey home, for storm door replacement in Hillsboro, OR

Storm Door Replacement in Hillsboro, OR

Storm Doors Matched to Period Casings and Plain Brickmould. Clear, Patterned, and Obscured Glass. Handle Finishes Paired With the Front Door. Screw Heads Hidden Under Cover Strips.

Front of a two-storey brick and grey lap-siding home with white windows and an arched front entry

A storm door puts a frame, glass, and a handle set on the front of a house. In Hillsboro's downtown neighborhood conservation zone and in the Orenco Townsite, the development code treats additions to a building's outside appearance as exterior alterations and sends them through review. A storm door over a street-facing entrance could fall under that wording, and Hillsboro Planning makes that call for a given house.

The work itself begins at the casing. A storm door's rails screw to the face of the trim around the main door, so the entry needs a flat, solid surface on both sides and across the head. On an older downtown or Townsite house, a molded or stepped casing can leave too little flat wood, and that changes how the door mounts. The owner picks glass, frame color, and handle finish while standing at the front door, with its own hardware in view.

VResh Construction team of five standing together on the front lawn of a two-storey home
500+ Projects CompletedPortland metro & SW Washington
Owner-SupervisedVlad personally on every project
Licensed OR #241979WA #VRESHCL776ND
EPA Lead-Safe CertifiedPre-1978 homes — most contractors aren't
Available 24/7Storm emergencies prioritized
Free Written EstimatesSame-day or next-day response
Milgard Warranty ProviderAuthorized warranty service provider
5–10 Year WarrantyOn all workmanship — written, per project
Veteran Discount10% off labor — up to $1,000
Senior Discount5% off labor for homeowners 65+
(503) 272-6436Call or text — 24/7
VResh Construction crew beside the company van with a new window unit, ready for a door and window job

(503) 272-6436 — Call or Text, Available 24/7

We answer calls and texts at any hour. For storm damage, active leaks, or structural emergencies, calling directly is the fastest path to a response.

Why Hillsboro Homeowners Choose VResh for Storm Door Replacement

01. A Flat Mounting Face on a Molded Casing

Storm door makers publish what the trim must offer. Andersen's measuring guide calls for at least 3/4 inch of flat trim face, brickmould at least 1 inch deep, and a door jamb at least 2 1/2 inches deep. A casing with a bead, a step, or a carved edge can fall short of that first figure. When it does, VResh fastens a straight wood strip to the casing where the rail will land, then primes and paints it, and the original profile stays in place around it.

02. Handle Finishes Paired With the Front Door's Hardware

A storm door handle set sits just in front of the main door's knob or lever, so the two read as a pair. Makers sell handle sets in several finishes, and Larson offers its full-view line with a choice of handle colors. On a house with an original brass or dark iron knob, Vlad compares the finish choices against it before the owner orders. VResh then mounts the chosen set and confirms that turning the handle draws the latch fully back.

03. Glass That Is Clear, Patterned, or Obscured

Clear glass adds the least to an entrance. Beveled, etched, or grille-patterned glass brings a design of its own, and frosted or textured glass lets daylight through while it blurs the view into the hall. Each changes the doorway's look by a different amount, which counts most on a street-facing door in either conservation zone.

04. A Frame Color From the Maker's Range

Aluminum storm doors arrive with a factory finish in a short list of colors, and white, almond, sandstone, brown, and black are common choices. A dark frame against light trim outlines the doorway, and a frame near the trim's shade recedes into the casing. Vlad holds the owner's pick up against the siding, the trim, and the front door at the visit.

05. Rails Pilot-Drilled and Screw Heads Covered

Larson's installation steps call for a 1/8-inch pilot hole before each rail screw. Dry, painted brickmould on an older house can split along a line of screws driven without pilot holes. VResh drills each pilot hole, drives the rail screws, and snaps in the cover strips that many models include, so the faces of the rails show no screw heads from the street.

Storm Door Styles for Hillsboro Entrances

Glass area, pattern, and frame weight decide how far a door changes an entrance.

OptionWhat It Is and Where It Fits in Hillsboro

Clear full-glass door with slim rails

One clear pane in a narrow aluminum frame. Its rails cover less of the casing than other styles, which suits a street-facing entrance in the downtown zone or the Townsite.

Beveled or etched glass door

A full or partial pane cut or etched with a pattern. It adds a design the original entrance never had, so it sits most easily on a newer house outside both conservation zones.

Obscured-glass door

Frosted or textured glass that passes light and blurs shapes. It fits a side door that looks across a narrow side yard at a neighbor's windows.

High-view door

Glass over most of its height above a short metal panel at the base. It fits a paneled front door whose solid bottom rail sits at about the same height, so the metal band repeats a line the door already has.

Retractable-screen door

Glass that lowers while mesh unrolls from a housing in the door's frame, and the mesh retracts when the glass goes back up. It fits a front porch entrance where the owner wants no mesh in view from the street outside the warm months.

Ornamental-grille door

A steel door with decorative bars across its glass. Its heavier look suits a midcentury ranch entry, where the bars can echo a porch railing or a metal light fixture.

Storm Door Replacement in Hillsboro: What the Project Involves

#
Step
What We Do and Why It Matters
1
Casing paint
Before any drill bit touches the casing of a house that predates 1978, VResh tests its paint for lead, and the job follows EPA lead-safe practices from then on.
2
Zone and Inventory question
Vlad asks whether the house sits in the downtown zone or the Orenco Townsite or appears on the Cultural Resource Inventory. If it does, the owner raises the storm door with Planning before anything is ordered.
3
Trim survey
Vlad checks the casing and brickmould for flat face and depth and notes any molded profile that will need a mounting strip.
4
Opening readings
Vlad records the narrowest width between the trim's inside edges and the height from sill to head trim, the figures makers size doors by.
5
Glass for the street view
Vlad and the owner weigh clear, patterned, and obscured glass against how much of the front door should show.
6
Front door check
Vlad looks over the front door, including its weatherstrip and the wood along its base, since the storm door will cover both.
7
Look and finish
With style, glass, frame color, and handle finish chosen, Vlad quotes the door and any strip or casing work its entry needs as one amount in writing. Vlad confirms permit needs for your project at the estimate.
8
Clear the opening
With the old door off its hinges, VResh backs out each rail screw, since a screw pried out with the rail can split dry casing.
9
Prepare the face
VResh repairs damaged casing, fits a flat strip wherever the profile calls for one, and primes and paints the fresh wood.
10
Fasten the rails
VResh pilot-drills and fastens the hinge-side and latch-side rails to the prepared face, with the head piece set level between them.
11
Door and covers
VResh hangs the door, sets its closer and the sweep at its base, and snaps the screw covers into the rail faces.

Exterior Alteration Review in the Downtown Conservation Zone

Downtown, the code's test turns on appearance. Under section 12.61.700 of the Community Development Code, in the SCR-DNC zone, an exterior alteration includes "any addition to, removal from, and/or change in the external appearance of a structure." Maintenance and repair that leave an exterior feature looking as it did fall outside that definition. A storm door fastened to the face of the entrance can be read as such an addition.

If Planning treats a given storm door as an alteration, the findings for the zone have to show that facades facing a public street keep their entrances and doors, among other features the section lists. The parts of the job that show from the street are the door's frame and glass and any strip VResh adds to a molded casing, so Vlad points out all three for the owner to describe to the city.

Orenco Townsite Houses Built Between 1910 and 1938

Section 12.62.300.L gives the Townsite zone, SCR-OTC, the same definition of exterior alteration and the same repair carve-out. Section 12.62.300.M then narrows what can happen to a dwelling built from 1910 through 1938, limiting its exterior alterations to rehabilitation or restoration that keeps the original building's character, unless the structure is beyond reasonable restoration. The first standard under M reads, "The architectural integrity of façade elements, including entrances, porches, dormers and additions, shall be maintained or restored."

On a Townsite house from those years, a storm door that hides a paneled or glazed front door, or a wide frame that covers much of the casing, sits poorly with keeping the entrance intact. A clear door with slim rails keeps the period door readable behind it.

Inventory Sites and the Storm Door Gap in Chapter 12.27

Houses on the Cultural Resource Inventory follow chapter 12.27, which sorts work into routine maintenance, minor alterations, and major alterations. Storm doors appear on none of those lists. The closest item is the wood-framed storm window, which the chapter places among minor Cultural Resource Alterations handled as a Type II procedure. With no listed track for a storm door, an Inventory owner asks Hillsboro Planning which track applies before VResh places the order.

Dark textured background
Close-up of beige quotation marks on a dark background.

Client's Talk

We have a wealth of experience working as main building contractors on all kinds of projects, big and small, from home maintenance and improvements to extensions, refurbishments and new builds.

Serving Portland Metro Area

VResh Construction provides window replacement, siding installation, roofing, dry rot repair and full exterior renovation services throughout the Portland metro area and Southwest Washington.

Portland Metro — Oregon

Southwest Washington

Extended Service Areas

OUR FAQS

Storm Door Replacement FAQs for Hillsboro Homeowners

Our Inventory house already has a storm door. Can it be replaced with one that looks the same?

A storm door that repeats the old one in size, material, and layout comes closer to the chapter's routine-maintenance list than a new style does. The closest match repeats the old door's view style and frame color first, since those two show most from the street.

Will a storm door stop the drafts around our old front door?

A closed storm door shields the main door from the wind that pushes cold air past its edges, so the entry usually feels less drafty. The main door's own weatherstrip still decides how much warm house air slips out into the gap between the main door and the storm door.

Our downtown house sits on a corner, and the side door faces the cross street. Does that door count as street-facing?

The findings language refers to facades facing a public street, so on a corner lot the wording can take in a side entrance as well as the front one. Vlad treats both street sides as visible when he helps the owner choose a door for either.

Our front door has a mail slot. Will a storm door get in the way?

It will. The slot ends up behind the storm door's glass, and a carrier would have to open the storm door to reach it. The usual answers are a mailbox beside the entry or a slot through the wall, settled before the storm door goes up.

The bottom of our wood front door is weathered. Can a storm door hide it?

Partly. A high-view door covers the lowest few inches behind its metal base, and obscured glass blurs the whole face of the door. Wood that has gone soft keeps deteriorating behind any storm door, so it calls for repair before the new door covers it.

Is there storm door glass that holds together if it breaks?

Laminated glass does. Andersen's storm doors come with tempered glass as standard, and the company offers laminated glass for added security and impact resistance. Tempered glass that fails crumbles into small pieces, while laminated glass cracks but stays in the frame on its plastic inner layer.

Will a storm door make our front hall darker?

Very little with clear glass, which passes most of the daylight reaching the front door. Obscured glass softens the light, and a high-view door gives up a narrow band at its base.

Will the closer show from the street?

Closers mount on the inside face of a storm door, between it and the main door, so from the walk they show only through the glass. A clear full-glass door shows its closer tube more plainly than an obscured-glass door does.

Get a Free Storm Door Replacement Estimate

On an older Hillsboro entrance, the edge of the front casing is the detail Vlad works around first. If it carries a bead, a step, or a carved profile, say which in your message, and he can plan for a mounting strip before he measures.

  • Same-day response on all estimate requests
  • No commission-based sales, just honest quotes
  • Licensed OR #241979 · WA #VRESHCL776ND
  • EPA Lead-Safe Certified for pre-1978 homes
  • Sill pan flashing on every door installation
Vlad, owner of VResh Construction, standing with a crew member on the front walk of a two-storey home