JELD-WEN Window Replacement in Portland
Siteline® Clad-Wood, W-5500™ & Custom Wood. AuraLast® Pine Protection Against Rot & Moisture. Pacific Northwest Builder Standard Since 1960. Licensed OR #241979.
JELD-WEN has been making windows since 1960 — and the company was founded in Klamath Falls, Oregon. Their product range spans from entry-level vinyl to premium custom wood, and their Pacific Northwest roots mean their engineering reflects the specific demands of this climate. VResh Construction has installed and replaced JELD-WEN windows throughout the Portland metro, and we approach every installation with the same standard: proper sill pan flashing, correct WRB integration, and head flashing above every window.
Here’s what sets us apart: we don’t push any single brand. When you call us, Vlad will look at your home, your goals, and your budget — then tell you honestly whether JELD- WEN is the right fit, and if so, which product line is appropriate. No commission pressure. Just a straight answer.
Whether you’re replacing aging vinyl with the Builders Series, upgrading a Craftsman bungalow with Siteline Clad-Wood, or doing an exact-match historic replacement with Custom Wood, we handle the full installation — removal, disposal, flashing, and finish carpentry — with no subcontractors and no surprises on the final invoice.
The JELD-WEN Product Line for Portland Homes
|
Siteline® Clad-Wood
Premium — Best for Portland Historic Homes
|
JELD-WEN's flagship clad-wood line and the product most commonly specified on Portland historic homes. Real wood interior using AuraLast® pine — engineered to resist termites, wood rot, and water damage at the wood-to-frame interface. Aluminum-clad exterior protects against Portland's sustained wet season. 17 window configurations, 20-year warranty, available in custom colors and finishes. Best for: Portland Craftsman bungalows, Prairie four-squares, Tudor revival, colonial revival — anywhere a real wood interior and clad exterior durability are both required. |
|
Custom™ Wood
Fully Custom — Exact-Match Replacements
|
JELD-WEN's highest-end line — fully custom wood windows with AuraLast® pine, widest range of configurations, specialty shapes, and divided light options. Can replicate divided light patterns and proportions of Portland's original early-20th-century windows. 20-year warranty. Best for: Historic preservation, architecturally significant Portland homes, exact-match divided light replacements where standard catalog sizes do not fit. |
|
EpicVue® Clad-Wood
Contemporary — Slim Profiles, Large Glass
|
Contemporary clad-wood line with slim profiles and large glass areas designed for modern architecture. AuraLast® pine interior, robust aluminum cladding exterior. Prioritizes sightline-to-glass ratio and geometric precision. 20-year warranty. Best for: Contemporary new construction, modern open-plan renovations, and applications where maximum glass area and slim exterior profiles are the design priority. |
|
W-5500™ Clad-Wood
Mid-Premium — 27 Exterior Colors, 28 Interior Finishes
|
A step below the Siteline in price with comparable clad-wood construction. AuraLast® pine interior, aluminum cladding, 15 configurations, and an exceptional range of color and finish options — 27 exterior colors and 28 interior finishes. 20-year warranty. Best for: Portland homeowners who want clad-wood construction and AuraLast pine protection at a slightly lower price point than the Siteline, with maximum color flexibility. |
|
Premium™ Vinyl (V-4500)
Premium Vinyl — Wide Range of Styles
|
JELD-WEN's best vinyl line — thermally efficient frames, Low-E insulating glass, wider frame and sash profile, and the widest range of operating styles in their vinyl lineup. Optional even sightlines for an architecturally precise look. Limited Lifetime Warranty. Best for: Portland homeowners replacing aging vinyl who want strong energy performance and a wider selection of styles without the premium price of clad-wood options. |
|
Builders™ Vinyl (V-2500)
Entry Level — Budget-Conscious Value
|
JELD-WEN's entry-level vinyl line — high-quality extruded vinyl that resists fading and won't chip or peel, narrow frame profile, low maintenance. 8 configurations, Limited Lifetime Warranty. Best for: Budget-constrained applications, rental properties, or any installation where performance and durability are required but wood interior aesthetics are not a priority. |
The JELD-WEN Product Line for Portland Homes
JELD-WEN has been manufacturing windows and doors since 1960. Their Pacific Northwest roots — founded in Klamath Falls, Oregon — mean their product engineering reflects the specific demands of this climate. Here’s what matters for Portland homeowners.
|
AuraLast® Pine
Engineered for Portland’s Wet Season
|
Portland’s 7–8 months of sustained rain creates a specific failure pattern in wood-interior windows: moisture infiltration at the wood-to-frame interface, particularly at the sill where wood is most exposed. JELD-WEN’s AuraLast® pine is engineered to address this — treated to resist water absorption, wood rot, and termites at the most vulnerable points. Every Siteline, Custom Wood, EpicVue, and W-5500 window uses AuraLast pine for the interior wood components. This is a meaningful differentiator over standard pine interiors in competing products — particularly for Portland’s climate. |
|
Clad-Wood Construction
Wood Warmth, Aluminum Durability
|
JELD-WEN’s clad-wood lines pair real wood interiors (AuraLast pine) with aluminum-clad exteriors. The aluminum cladding handles Portland’s sustained moisture, UV exposure, and paint stress — the wood interior stays dry and visually intact because it is never directly exposed to the exterior environment. For Portland homeowners replacing original wood windows in Craftsman or colonial revival homes, the clad-wood configuration delivers the authentic wood interior character of the original windows with significantly lower maintenance requirements. |
|
JELD-WEN in the Portland Builder Market
|
JELD-WEN is one of the most widely specified window brands in Pacific Northwest new construction and renovation. Their dealer network, parts availability, and service infrastructure are strong throughout the Portland metro and SW Washington. For homeowners who need to match existing JELD-WEN windows already in the home — a common scenario in Portland homes built in the 1990s–2010s — the matching capability across the product line is a real advantage. |
|
Warranty
20-Year on Clad-Wood, Limited Lifetime on Vinyl
|
Siteline, Custom Wood, EpicVue, and W-5500 clad-wood lines carry a 20-year warranty on glass seal failures, manufacturing defects, and AuraLast pine components. The V-4500 and V-2500 vinyl lines carry a Limited Lifetime Warranty for the original purchaser. Full warranty documentation is provided at project completion on every VResh installation. |
JELD-WEN vs. Andersen vs. Milgard — Portland Comparison
JELD-WEN Window Installation — What We Do and Why It Matters
Rough Opening Assessment
Measure existing rough opening, assess framing condition, check for moisture damage and rot at sill and jamb framing. JELD-WEN Siteline and Custom Wood windows require specific rough opening tolerances — we verify before ordering to avoid field modifications that compromise the flashing system.
Lead Testing (Pre-1978 Homes)
Test all surfaces that will be disturbed. Portland’s housing stock includes a significant proportion of pre-1978 construction — RRP compliance is standard on every VResh project involving older homes.
Remove Existing Window
Remove the existing window unit, sash, stops, and exterior trim. Inspect the rough opening fully — this is where dry rot and moisture damage are found. Portland homes frequently have concealed water damage at the sill, particularly in the cases we see replacing original 1970s–1990s windows.
Structural Repair (If Needed)
Repair any rot or moisture damage in the rough opening framing, sill, and jambs before new installation. AuraLast® pine protects the new window’s wood components — but it does not repair existing rot in the rough opening framing. Substrate repair is non-negotiable before any new installation.
Sill Pan Flashing
Install a formed sill pan at the bottom of the rough opening before setting the window. Sill pan flashing catches any water that passes the window and directs it to the exterior. Standard on every VResh installation — routinely skipped on budget installations throughout Portland.
Weather-Resistive Barrier Integration
Integrate window installation with existing or new WRB — housewrap or building paper. Lap the WRB over the sill pan and under the head flashing for a continuous drainage plane. This step is especially important with JELD-WEN clad-wood units, where protecting the AuraLast pine interior from any bulk water infiltration at the rough opening perimeter is the goal.
Set and Shim the Window
Set the JELD-WEN unit in the opening, shimming plumb and level. JELD-WEN Siteline and W-5500 windows are manufactured to tight tolerances — proper shimming ensures correct operation of all sash types and prevents racking that would stress the clad frame.
Head Flashing
Install head flashing above the window unit, integrated into the WRB above. One of the most commonly missing details on Portland window replacements. Its absence is the leading cause of water infiltration above the window frame — particularly critical for clad-wood units where water above the window can reach the wood interior.
Insulate and Air Seal
Fill the gap between the window frame and rough opening with low-expansion foam. JELD-WEN clad-wood windows provide strong thermal performance — that performance is only fully realized when the rough opening perimeter is properly air-sealed.
Exterior Trim
Install exterior casing, back-primed and properly bedded in sealant. Match the existing profile on historic homes. On Siteline and Custom Wood installations for Portland Craftsman homes, matching the original casing profile exactly is a priority — we source matching profiles through millwork suppliers when needed.
Interior Trim & Final Walkthrough
Install interior casing to match the existing trim profile. Walk through the finished work with the homeowner, confirm operation of all sash, and hand off warranty documentation. Job site left clean. On divided light installations, confirm SDL profiles are aligned correctly before signoff.
What Our Clients Say
We have a wealth of experience working as main building contractors on all kinds of projects, big and small, from home maintenance and improvements to extensions, refurbishments and new builds.
Serving Portland Metro Area
VResh Construction provides window replacement, siding installation, roofing, dry rot repair and full exterior renovation services throughout the Portland metro area and Southwest Washington.
Portland Metro — Oregon
Southwest Washington
Extended Service Areas
(503) 272-6436 — Call or Text, Available 24/7
We answer calls and texts at any hour. For storm damage, active leaks, or structural emergencies, calling directly is the fastest path to a response.
JELD-WEN Window Replacement FAQs — Portland Homeowners
Get a Free JELD-WEN Window Estimate
Vlad comes out, assesses every opening, and gives you a straight written quote — no sales pressure, no commitment required.
✓ Same-day response on all estimate requests
✓ No commission-based sales — just honest quotes
✓ Licensed OR #241979 · WA #VRESHCL776ND
✓ EPA Lead-Safe Certified for pre-1978 homes
✓ All major window brands available — we let you choose