Tool belt with a hammer, speed square and tape measure on the floor of the VResh Construction work van, for storm door replacement in Tigard, OR

Storm Door Replacement in Tigard, OR

Stock and Custom Sizes Checked Against the Opening. Safety Glass and Lever Handle Sets. Frames Checked Corner to Corner. Finishes Chosen to Resist Rust.

Vlad of VResh Construction pointing up at a white window while talking with a homeowner beside an arched front entry

Most of the work in a storm door replacement is fit. An opening can fall between stock sizes, a frame can rack slightly out of square over the years, and a sill can slope enough to leave gaps at the bottom corners. The city's property maintenance chapter, TMC 14.16, also bears on the choice in two places: how a storm door opens from inside and how its metal holds up.

VResh checks the opening against the maker's size range before anyone orders, squares up the mounting, and closes the corners at the sill. The owner chooses glass, handle style, hinge side, and frame material, and Vlad points out any rust on the old door and how far it has spread.

Four VResh Construction crew members in gloves, dust masks and a hi-vis vest standing beside the open work van
500+ Projects CompletedPortland metro & SW Washington
Owner-SupervisedVlad personally on every project
Licensed OR #241979WA #VRESHCL776ND
EPA Lead-Safe CertifiedPre-1978 homes — most contractors aren't
Available 24/7Storm emergencies prioritized
Free Written EstimatesSame-day or next-day response
Milgard Warranty ProviderAuthorized warranty service provider
5–10 Year WarrantyOn all workmanship — written, per project
Veteran Discount10% off labor — up to $1,000
Senior Discount5% off labor for homeowners 65+
(503) 272-6436Call or text — 24/7
VResh Construction crew beside the company van with a new window unit, ready for a door and window job

(503) 272-6436 — Call or Text, Available 24/7

We answer calls and texts at any hour. For storm damage, active leaks, or structural emergencies, calling directly is the fastest path to a response.

Why Tigard Homeowners Choose VResh for Storm Door Replacement

01. Safety Glass in the Panes

Federal rules on architectural glazing, 16 CFR Part 1201, list storm doors among the products whose glass has to meet a safety standard, and makers generally meet it with tempered glass. Tempered glass breaks into small pieces when it fails. It also cannot be cut once it has been tempered, so a replacement pane comes from the maker at the size that model takes.

02. A Lever Handle for Full Hands

A lever opens with an elbow or the side of a wrist when someone carries groceries or a laundry basket, while a round knob needs a grip and a twist. Storm door handle sets come in lever and knob styles. VResh fits the chosen set to the latch side and checks that the lever on each face pulls the latch clear.

03. Rail Extenders That Close the Bottom Corners

A storm door's side rails stop short of the sill, and an extender slides out of the bottom of each rail to meet it. Larson's guide has each extender slid down to the threshold and sealed with the adhesive strip that comes with it. On a sill that sits lower at one end, the two extenders run to different lengths, which seals the corner gaps that the expander along the door bottom cannot reach.

04. An Opening Checked Corner to Corner

Before a rail goes up, VResh measures the opening diagonally in both directions, as Larson's instructions direct. Larson looks for the two readings to fall within 1/8 inch of each other. Readings farther apart mean the opening is out of square, and VResh adjusts the rails so the door meets its weatherstrip evenly along both sides.

05. Hinge Side Settled Before the Order

Some storm doors are universal-hinged, which lets the installer pick the hinge side on site. Others have their hinge side set at the factory, and Andersen has buyers of certain models specify it when they order. Vlad settles the side with the owner before ordering, based on the main door's swing and the space beside the entry, so a factory-handed door arrives the right way around.

06. Rust Where an Old Steel Door Holds Water

On a steel storm door, rust tends to start along the bottom rail, where water sits after rain, and around screw heads where the finish has cracked. A door rusted through at the bottom has lost strength there, and its hinge and closer screws may no longer grip. Vlad shows the owner where the rust has spread before VResh takes the door down.

Storm Door Options for Tigard Homes

Two questions separate most models: which frame material a door uses and where the screen goes when nobody needs it.

OptionWhat It Is and Where It Fits in Tigard

Aluminum full-glass door

A single tempered pane in an aluminum frame with a factory finish. Aluminum resists rust, which suits an entry that lawn sprinklers reach.

Aluminum-clad wood-core door

An aluminum skin wrapped around a solid wood core, heavier than an all-aluminum door. It fits an owner who wants the outer door to shut with the solid, quiet sound of a wood door.

Steel security door with a deadbolt

A steel frame carrying a handle set and a separate deadbolt. It fits an owner who wants a stronger outer door at the main entry.

Half-glass door

Upper-half glass above a solid metal lower panel. It fits an entry with no overhang, where rain splashing up from the step would otherwise spot the lower glass.

Panel-swap full-view door

A glass pane that lifts out for a full screen panel, with no rollers or tracks inside the door. It fits an owner who wants the simplest mechanism to look after.

Retractable-screen door

The screen lives rolled up inside the door and comes out only when the glass is lowered. It fits a doorway where the screen should stay clean and out of the weather between uses.

Storm Door Replacement in Tigard: What the Project Involves

#
Step
What We Do and Why It Matters
1
Handle and hinge side
Vlad settles lever or knob and the hinge side with the owner, since some doors have their hinge side fixed at the time of order.
2
Size check
Vlad measures the opening and compares the readings with the size ranges of the models the owner is considering.
3
Choices and estimate
After the owner decides on frame, glass, handle, and hinge side, Vlad hands over a written estimate covering the door and its installation. Vlad confirms permit needs for your project at the estimate.
4
Association rules
If the house belongs to a homeowners association, the owner checks its storm door rules on style and color before placing the order.
5
Trim and sill
Before the old door comes off, Vlad checks the trim the rails will land on and how far the sill drops from one end to the other, which sets how far each extender has to run.
6
Older paint
While the old rails are still in place, VResh tests any trim paint laid down before 1978 for lead, then follows EPA lead-safe practices.
7
Removal
VResh lifts the old door off its hinge rail, then unscrews the rails from the trim.
8
Diagonals
VResh measures the opening corner to corner both ways and adjusts the mounting if the two readings differ.
9
Rails and extenders
VResh fastens the rails, slides each extender down to the sill, and seals it with the strip the maker supplies.
10
Door, handle, and closer
VResh hangs the door on the chosen side, mounts the lever or knob set, and adjusts the closer.

Inside Release Under TMC 14.16.180A

One line of the city's property maintenance chapter names storm doors directly. Section 14.16.180A reads, "All screen doors and storm doors must be easily openable from the inside without the use of a key or special knowledge or effort." Other Oregon city codes carry the same sentence or one very close to it, and in Tigard it reaches all residential property.

The question sharpens with a security storm door. Many models pair the handle set with a separate deadbolt, so getting out means working two pieces of hardware, which puts the pairing up against the section's ease-of-opening wording. How the section applies to a particular door is for Tigard's Building Official to decide under chapter 14.16. Storm door deadbolts commonly carry a thumb turn on their inside face, and Andersen's help center describes locking its storm door from inside with one. After the door goes up, Vlad shows the owner how both locks release from inside.

Rust, Corrosion, and the Choice of Frame

A second line in the chapter, section 14.16.140C, reads, "Exterior metal surfaces shall be protected from rust and corrosion." A storm door is mostly exterior metal: frame, hinge rail, closer tube, screws, and expander. An old door rusting at the bottom rail or around its screws can fall under that line, and the rust is also a sign the door is worn out.

For the new door, the frame material decides how much the owner has to watch. Aluminum resists rust, and an aluminum-clad wood-core door keeps its wood away from the weather. A steel security door keeps rust off only where its factory coating is whole, which makes the bottom rail and the screw heads the places to look each spring.

Fitting a Stock Storm Door to the Opening

Storm doors come in a few standard widths, most often 32 and 36 inches, with 30 and 34 inches in some lines, and in heights of about 80 to 81 inches. Each nominal size fits a small range of openings. Larson's sizing table, for example, places a 32-inch door in an opening from 31 7/8 to 32 inches without shims and up to 32 3/8 inches with them, and its 34- and 36-inch doors follow the same pattern. Andersen's measure guide has the reader measure at the inside face of the exterior trim and work from the shortest reading.

An opening outside those ranges takes a custom-size door. Ranges differ a little between makers and product lines.

Dark textured background
Close-up of beige quotation marks on a dark background.

Client's Talk

We have a wealth of experience working as main building contractors on all kinds of projects, big and small, from home maintenance and improvements to extensions, refurbishments and new builds.

Serving Portland Metro Area

VResh Construction provides window replacement, siding installation, roofing, dry rot repair and full exterior renovation services throughout the Portland metro area and Southwest Washington.

Portland Metro — Oregon

Southwest Washington

Extended Service Areas

OUR FAQS

Storm Door Replacement FAQs for Tigard Homeowners

Our neighborhood has an HOA. Will the city check whether our storm door follows its rules?

No. Tigard's building permit guide states that the city does not enforce the codes, covenants, and restrictions of neighborhood homeowners associations, and it tells members to check with their association that a project fits its rules. If an association has a rule on storm doors, the association applies it, and the door's model name and color are the details to bring to it.

How should we clean a new aluminum storm door?

Larson's support center lays out cleaning for the frame, the glass, and the handle with nonabrasive methods, to protect the door's finish and its function. Scouring pads and harsh cleaners wear down the coating that keeps metal from corroding. A soft cloth and mild soap suit the frame, and the glass takes an ordinary glass cleaner.

The old storm door is a 36-inch door. Will a 36-inch replacement fit?

Often, though the label on the old door names the door, and the opening behind it may have been shimmed out or trimmed in by whoever hung it. A door ordered from the old label alone can arrive too tight for the opening, or loose enough to leave a gap along the latch side.

Our steel storm door has rust spots but feels solid. Does it have to go?

Only if the rust has gone deep. Light surface rust on a sound frame comes off with sanding, and a metal primer and fresh paint cover the spot. Rust that flakes away in layers or leaves pinholes in the metal has gone past that point.

Get a Free Storm Door Replacement Estimate

A storm door that someone opens with full hands every day calls for a different handle than one a guest uses once a week. If your first call or text says who uses the entry most, Vlad can narrow the handle styles before he measures.

  • Same-day response on all estimate requests
  • No commission-based sales, just honest quotes
  • Licensed OR #241979 · WA #VRESHCL776ND
  • EPA Lead-Safe Certified for pre-1978 homes
  • Sill pan flashing on every door installation
Vlad, owner of VResh Construction, and a team member standing on the front lawn of a two-storey home